News

How to choose a carving machine

2018-08-09

First, the classification of engraving machine:


    From the functional point of view, the computer engraving machine is divided into two categories: small power engraving machine and high power engraving machine.


    The low-power engraving machine refers to an engraving machine with a small engraving motor power (generally 800-1500W). Due to its small power of engraving motor, it can only be applied to fine machining with less cutting surface at a time. For example: badges, sand table models, handicraft surface processing, etc. This type of engraving machine cannot perform high power engraving and cutting.


    The high-power engraving machine refers to an engraving machine with an engraving motor power of more than 3000W. This type of engraving machine can not only perform low-power engraving, but also high-power engraving.


    For example: the production of crystal characters, all kinds of advertising signs, irregular cutting of sheet metal, processing of artificial stone. Because of its high power, it can cut 30mm thick plexiglass at a time or use high-power molding engraving with a forming knife. Some users are not aware of the high power and low power of the engraving machine. After watching the demonstration of the high-power engraving machine, they bought a low-power engraving machine with a slightly lower price because of the investment difficulties. As a result, only the badges of less than two yuan each (only a few cents in one area) can be engraved. For high-power carvings such as plexiglass signs, only others can be seen.


    The same investment, the same store cost, the same operation and other staff wages, but 80% of the engraving business can not do, not only reduce their own efficiency, but also in a very disadvantageous position in the competition. This is a must when choosing an engraving machine. If you are applying in this industry, be sure to purchase an engraving machine that can perform high-power engraving.

     

    Second, the brand of engraving machine:


    The production technology of the engraving machine is much more complicated than that of the cutting plotter. At the same time, the engraving machine is different from the engraving machine. This is why many cutting plotter manufacturers have been developing engraving machines very early and have not launched the product. The engraving machine requires fine and stable, and if there is instability, it will cause serious material waste. Therefore, the purchase of products with strong manufacturers can reduce the possibility of waste and loss caused by machine failure.

    

    Third, carefully observe the operation demonstration of the engraving machine:


    The engraving of the small characters can be used to see the precision of the engraving machine. The engraving of high power can see the application range of the engraving machine. If the precision of the engraving machine is very poor, then the edge roughness will occur when performing high-power engraving; if the resonance (vibration) occurs during high-power engraving, the precision of the engraving machine will be greatly reduced. If the engraving machine cannot perform high-power engraving, the application range of the engraving machine will be greatly reduced. Therefore, according to the demonstration of the engraving machine, the application range of the engraving machine is determined, which is the scope of your engraving business. The scope of application of the engraving machine directly determines whether it can bring you economic benefits.

 

    Fourth, the application of the engraving machine and software:


    The consumables of the engraving machine should be very low. The general engraving machine should be able to apply ordinary lathe processing tools, and the price is only ten yuan. However, some engraving machines use special tools, which greatly increases the cost of consumables. The application of the software is also very important. Some brands of engraving machine software are not fully functional, and the engraving machine cannot use other software. Other brands of engraving machines can apply a variety of common software, as long as there is new software or a new feature upgrade of a certain software, these new technologies can immediately create benefits for you.


Contact us

Address:No. 88, east outer ring road, jingdong, Beijing

Zip code:101601

Phone:010-65419234

Fax:010-65419234

Mobile web site

Online consulting
phone

010-65419234