News

How to maintain wood engraving machine

2018-08-09


   How to maintain wood engraving machine


   

Who has used a wood engraving machine many people (woodworking engraving router) will generally think that there is no need to clean the CNC router, so it is clean, can be said that basically no control, in the appropriate time to clear the table on the line, why? Because they believe that the working process of the wood engraving machine itself is a big dust, and he himself is in the dust application of things, if every day to clean, it would be more trouble, so many people not only do not clean, and let the thing filled machine, this practice is wrong.


1. The computer

Regular virus detection, but can not open the attention of serious anti-virus work interference.

Clean the dust of the cabinet regularly, and pay attention to the heat dissipation of the cabinet.

Organize your hard drive regularly to optimize your computer system.

Computer anomalies may also cause many problems, especially for connecting wood CNC router, we summarized the we found technology in the process of woodworking engraving machine maintenance, computer abnormal also give us repair caused a lot of unnecessary trouble, also delayed the customer's business, ask the client pay attention to several aspects of computer maintenance.


2. Clean up

Regular cleaning of industrial control boxes, dust on circuit boards is the biggest killer.

Regular cleaning of screw rods to prevent the presence of foreign matter on rod screws, screw devices are important for determining wood routers

Accuracy and screws also play an important role in the transmission process.

When the work is done clear the table in time, it provides a convenient nearby wood engraving machine.

Clear the rails and the adjacent material shavings of the guide rails to prevent the card from causing interference from debris in the machine.

CNC woodworking machine


3. The oil


After adding the oil, move back and forth slowly to ensure the lubricant can be applied evenly on the guide rail and the screw.

The aircraft should not be refueled regularly for a long time to ensure the flexibility of the transmission system.

First of all, clean the guide rail with screws, can be used in the cloth (not depilate) to clean out the oil of the guide and screw and material debris. At low temperatures, it is best to add antifreeze and oil to railway and screw motor oils.

Fuel cycle twice a month, that is, every two weeks, once oil.


Temperature of 4.

When the machine is not in use, if the indoor temperature is low, it is best to pour water into the water tank to prevent the tank and water pipe from cracking.

The ambient temperature in the operating room, wood engraving machine, is best at room temperature, at least staff won't be cold.

Check the minimum fuel standard applicable temperature.

The temperature of wood carving machine is not very big, but because the user USES butter screw, winter also forgot to clean, cause every time starting up did not get off, some of the studio temperature is too low, add oil, can or freeze on the machine did not run.


5. The cooling water

Have the condition to prevent freezing to cool down.

Pay attention to the ambient temperature because the water temperature is too cold and the water tanks and pipes freeze and crack. If the cooling water is too dirty the motor can be caused by a serious injury to ensure that the cooling water and the pump are clean and working properly.


For more information, please feel free to contact us at www.longdiaocnc.com


Contact us

Address:No. 88, east outer ring road, jingdong, Beijing

Zip code:101601

Phone:010-65419234

Fax:010-65419234

Products

Mobile web site

Online consulting
phone

010-65419234