Question 1: Open the software, the computer prompts “failed to open card, check card tips”.
Solution:1. A check card driver is not installed, or the board for a PCI slot;
1.one or three-axis does not move around or walking is not normal
1: Control are loose or defective.
2:corresponding to the drive shaft of defects.
3:the corresponding axis stepper motor...
Step 1. Determine axes quantity:
According to the shape of the final working sample and your budget, choose the axis quantity of the processing requirement: 3 axis, 3 axis with rotary system,...
Longdiao, as a profession supplier of advertising engraving machine, attended 2015 Shanghai International Advertising Exhibition
Longdiao, as a profession supplier of advertising engraving machine, attended 2012 Beijing International Advertising Exhibition
Continuous running time 10 hours a day, to ensure the normal operation of the cooling water pump clean and never make water appear spindle motor water shortages, regular replacement of cooling...
Woodworking engraving machine is mainly used for the processing of wood, to make it more beautiful. Woodworking engraving machine currently available on the market a wide range of uneven...
The classification of engraving machines: according to the different function, there are two kinds of machine, Low-power engraving machine and High-power engraving machine. The low-power type’s...
1.Spindle motor is hot.
Solution: First check the pump works or not, then check whether the circulating water is low level.
In summer, thunderstorm weather is more frequent, we should pay more attention on the protection formachine, so how to do?ourtechniciangivesome proposals asfollowing:
Jingdong Yanjiao East Outer Ring Road No.88, Beijing, China